Notes of operatingpipe bending machine:
1. Before working, the workers must correctly wear working protective device. 2. Check whether the protective device is well of the bending machine, if not, don't start. Pipe bending machine should be connected with the ground, insulating with electric device, the voltage should be stable. 3. Check the machine's lubricant part, when is shortage of oil or no oil, should plus the oil enough. 4. According to the pipe diameter chose the pipe clamp, and put them in right order. 5. Don't make oil between pipe and pipe clamp. 6. Do empty run testing, check whether the machine run well, if the electric switch is good use. After checking everything well, start working. 7. Should point special people to control the switch. 8. When the pipe bending machine is running, the operator should not leave the machine. 9. Finish working, turn off the electric power. 10. No drinking of the operators before working.
welcome to visit us for more information of pipe bending machine,and other machines,elbow forming machine,pipe expanding machine etc.
E-mail:ceo@xnmac.com
|