Heating induction coil

The Heating induction coil is the load of Medium Frequency Power Source, it made by square copper
 with wall thickness of 3-5 mm.

3-5 mm Heating Induction coil can be used into 50-160 kw Power source.
The power source's runing frequency is 8000HZ -10000HZ.
The max output current is 320A

Different sizes of elbow ,need different types of coil roller way to promote working effecicients and save energy.

Square copper is better than round copper when making Heating Induction coils:
1.It will never has bend corning problem when roll to small radius Hot Induction coil for small sizes.
2.It is esay to drill small holes when used for bending machine.

Copper Heating Induction coil has good magnetic permeability,so it is widely used as heating coil
 for Medium Frequency Power Source.

The Heating Induction coil that mentioned,widely used as

heating coil for medium frequency power source

Induction Coil common faults are the following:
 
1.induction coil leakage, which may cause ignition coils, must be promptly welding to run.
2. molten steel sticking on induction coil, if steel slag is hot, redness, can cause copper burn, must be promptly cleaned.
3.Induction coils short circuit, such failure are particularly vulnerable in the small medium frequency induction furnace.
   because the furnace is small,Under hot force,the coil is deformation and cause short circuit fault. Trouble appears
   as large circuit, higher operating frequency than the normal time.

From above,we know,we shall know more knowledge on Medium Frequency Power Source,know usual fault source.Try to solve

problems as right ,quick as we can.