CNC pipe bending machine

Characteristics of CNC pipe bending machine:

1. The machine adopts PLC control, man-machine interface, control module, programmable conversational operation simple is easy.

2. Freedom of choice, automatic and manual, semiautomatic, slow corners and slow core-pulling function.

3. Axial feeding (Y), corner (B) for servo drive shaft, head fluctuation in mold move (H), with about changing mould mobile (Z) shaft are, bend (C) for hydraulic drive shaft.

4. Program, each file can be set in 20 automatic feeding, automatic corner, automatic exchange tube bending Angle and 20, but memory 100 group file.

5. In the machining process of the display screen mobile controller (Y) axial feeding, corner (B) axis, automatic exchange (Z) and H, bend pipe (C) of the shaft machined now, still can set value movement, single-step cycle, the half cycle.

6. With automatic detection errors and faults, when any abnormal function of action or any dangerous when there is a machine vision immediately stop, demonstrate breakdown reason, helps operators trouble-shooting.

Welcome to visit us for more information of the CNC pipe bending machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if

the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate

normal, if working normally, then you should check whether the electro-hydraulic relief valve or the

one-way unloading valve has contaminant that made it could not working or not(this phenomenon

usually happen when you just use this machine). If has contaminant, you should open it, clean by

gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.