Fitting bending machine

Hei Yan is specialized in producing hydraulic machinery like medium frequency pipe bending machine, hydraulic elbow pushing machine etc.

Fitting bending machine working principle is adopting the medium frequency power to heat, bend the pipe when some parts of the pipe are heated. Compared with cold condition bending pipe, the medium frequency pipe bending machine not only needn't the whole set moulds but also the size of the machine is just 1/3-1/2 of the cold condition pipe bending machine.

Now Medium Fitting bending machine technique is one of the most economical, effective technique.
Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.