Heating coils bending machine

HYG series Heating coils bending machine is specially designed for production bending radius above R = 3 times benders.

Technical Data:

Max. process diameter: OD 325mm
Min. process diameter:  OD 89mm
Min. process thickness:   6mm
Max. process thickness: 18mm

The Heating coils bending machine has reasonable design, reliable working, and it's easy to operate, with good working performance.

The whole Heating coils bending machine is composed of host machine and medium frequency heating power.
Host machine used hydraulic transmission, it's easy to achieve fast conversion between fast pushing-fast return and feeding speed, and randomly to adjust the pushing force. Stable working with low noise, no pollution. We can also adjust the process specification of the products. It's convenient and reliable, low failure rate.

Welcome to visit us for more information of the Heating coils bending machine,and the elbow forming machine ,pipe expanding machine, tee machine that you are interested in.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.