High frequency induction bending is apply to industrial pipeline,it has same function with Medium frequency induction bending machine.
High frequency induction bending combined by machine body,tailstock,guideroll,high frequency output transformer,induction coil,cooling system,rocker,clamp and main drive device.
751KVA high frequency transformer used to adjust power which to induction coil,it fixed on output transformer bracket,can adjust power according to requirement to ensure heating temperature.
High frequency heating coil is made by purple copper ( content of copper 99.9%),it is hollow,section can be round or square.There are cooling water or air during High frequency induction bending working,also has many many holes to spray waters to heating pipes.Heating coil is important part of high frequency inductionb bending machine,normally,the coil width equal to bender thickness.
Medium frequency induction bending machine has the same way with High frequency induction bending.
Cooling system connect with heating coil,there are many holes on heating coil,different pipe material has different spray direction,to keep pipe has good cooling process during bending.
Rocker used to confirm radius of bends.During working,the rocker is rotating by pushing force of pipe.
High frequency induction bending Clamp used to tight pipes,open and close is controled by hydraulic cylinder or hydraulic motor.
Main drive device is motive power when pushing of pipe.
|
