Induction bend machine 

Induction bend machine is a hot bend process of pipes and shaped steel etc. using high frequency induction heating.It is widely utilized for pipeline, chemical plant, power plant, shipbuilding, and structures. Small radius bend is used in industrial plant piping in place of elbow.Also it's used in the piping work as the most economic way of Weldless Piping System.Rental Bender Service is available at plant construction site anywhere.Shaped steel bend is widely used for structure and civil construction.

Because of the quality, accuracy and demonstrated savings achieved through induction bend machine, it is a preferred alternative to traditional fit-and-weld procedures.The induction pipe bending process uses induction heating to produce highly accurate bends. The quality of induction bend machine is superior to the elbow fitting.nduction bending is an efficient way to form a bend when only a specific area of a metal tube or pipe requires a bend. That specific area is usually heated with the use of an induction coil in order to make the material easier to bend to a preset radius.

Induction bend machine

1 With induction bending you have the ability to heat a specific area of the metal pipe and this will ensure that a minimal amount of distortion occurs after the bend is completed.

2 This process results in higher energy efficient systems since only a portion of the metal requires heating the power required to create the bend is kept to a minimum.

3 The induction bending process does not require any sand filling or internal mandrels, so the overhead costs are much lower.

4 Bending times do not take as long as other processes, making this process more cost effective.

5 The overall quality of the product is better than that of cold bending, where excessive warping and wall thinning may occur.

6 And finally this process eliminates the need for mechanical or welded joints, resulting in a smoother finish.