Pipe bender:

The pipe bender is composed of host machine and medium frequency heating power.
Host machine used hydraulic transmission, it's easy to achieve fast conversion between fast pushing-fast return and feeding speed, and randomly to adjust the pushing force.

Advantages of pipe bender:

Full-automatic hydraulic pipe bender is composed of mechanical part and electrical control part contains power source agencies. feed mechanism, clamp heating bodies, rocker arem pipe organs, electrical control part utilizes PLC programming control board to effectively solve the matching problem of IF power and hydraulic system.

If you are interested in our pipe bender, do not hesitate to contact us. Hei Yan also supply elbow forming machine,pipe expanding machine,cold draw tee machine,hydraulic press,medium frequency power supply,moulds,steel pipe,pipefittings and so on.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.