Hei Yan group supply tube bender.

This tube bender can bend tube(mild steel, stainless steel etc) from 0 degree to 180 degree angle.This tube bender use seamless steel pipe,welded steel pipe,spiral welded steel pipe as raw materials.

tube bender operation steps:

1.Feed bending pipe in frond of machine.
2.The high pressure pump and frequency conversion work together,adjust the position of radius arm and large clamp by assistance cylinder.
3.Fasten bolt fixing radius and main rail,fasten bolt fixing radius and clamp
4.calculate the bending lending according to the bending angle,mark the bending length on the pipe.

Specifications of tube bender:

1 Production Ranges:OD21mm-1420mm
2 Radius:2.5D-100D
3 Thickness:10mm-80mm
4 Drive type:hydraulic,chain

Welcome to visit Hei Yan to know more information about tube bender.
Hei Yan also manufacture elbow forming machine, pipe expanding machine, hydraulic press and some accessories.Welcome you to visit us for more informaiton of pipe bending machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.