Beveling machine:

Hei yan group is specialized in manufacturing beveling machine to meet customers needs.

The beveling machine adopts standard dynamic head to innovate the special dynamic cabinet, which has good cutting capacity.It has such functions as manual adjustment and electrical rapid feeding and returning of knife;the clamping of working piece uses clamping seat and chain soft clamping device on the working platform and the clamped piece will not be limited,thus,it can be used widely.The working piece can be spotted by regulation of main machine of dynamic cabinet from left side to right side and the regulation of working platform from upper to lower;the pipe end cutting bevel adopts angle knife rest differential speed automatic feeding for processing;when the wall thickness of pipe is less than 12mm,then manual movement of main motor can be used for one time off cutting forming.

Features of beveling machine:
This equipment easy operation,maintenance,performance and stability,bevel of the rough, accurate grinding and polishing and grinding a botom edge can be completed to meet the different thickness,size and different grades of grinding requirements.

If you are interested in our beveling machine,pls visit hei yan factory to know more information about beveling machine.hei yan also pressionally supply elbow forming machine,pipe expanding machine,bending machine,hydraulic press,medium frequency,steel pipe,pipefittings and so on.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well, please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finishing the work,need do maintenance work.