Fittings bevelling machine

The Fittings bevelling machine is featured in unique design, compact structure, good appearance and convenient to operate. It is an ideal equipment for chamfering metal right angle elbow end. The products processed by the machine are complying with relevant elbow beveling standard.

Fittings bevelling machine is used in  Bevel edge,Pipe bevel,elbow bevel,tee bevel. It is the key equipment using for pipe making and pipe welding of the head of pipe.This electric bevelling machine can be equipped with different clamps, which could bevel OD219-OD1420,also act to customers demand.

welcome to visit our company from all over the world to know more about Fittings bevelling machine and hydraulic equipments.We also supply elbow forming machine,bending machine,expansion bending machine and hydraulic press etc.We bear in mind that "quality first, credit first, service first" since we opend the company, Sincere cooperation lay a solid foundation for success.

Notes for Pipe fitting bevel machine

1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.