|
|
HY-beveling machine |
|
Type:HYP |
Specification:219mm-1420mm |
Application:Pipe beveling, Elbow beveling, Tee beveling |
Delivery:30-60 days |
|
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
HY-beveling machine:
Hei yan group is specialized in manufacturing HY-beveling machine.
This HY-beveling machine series are portable out-mounted pipe cutting and beveling machine with the following advantages:Lighter weighted,minimal radial space,easy to operate.
The HY-beveling machine is used in the fields of petroleum,chemical,natural gas,power supply construction,boiler and nuclear power,Machine body is toroidal cavity construction,can be divided two part,equipped at any space on the pipeline quickly and steadily.Mounting in one time,can be used for cutting and bevelling.Can be used for cutting and bevelling process of different type and size pipe,pressure vessel and steam generator,safe and quickly.
HY-beveling machine Can be used for treatment of pipes material:carbon steel,stainless steel and alloys.Cold cutting process will not influence the quality of the material of the pipe.The machine is safe,convenient and widely-used,and it is a ideal pipe end beveling processing equipment.
If you are interested in our HY-beveling machine,pls visit hei yan factory to know more information about HY-beveling machine.hei yan also pressionally supply elbow forming machine,pipe expanding machine,bending machine,hydraulic press,medium frequency,steel pipe,pipefittings and so on. |
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Mode |
Beveling range |
Beveling thickness |
Rotating speed |
Weight of main machine body |
HYP-16 |
OD 16-28 |
3-15mm |
58rpm |
5kg |
HYP-28 |
OD 28-76 |
3-15mm |
55rpm |
7kg |
HYP-65 |
OD 65-159 |
3-20mm |
34rpm |
16kg |
HYP-80 |
OD 80-273 |
20mm-75mm |
16rpm |
38kg |
HYP-150 |
OD 150-351 |
20mm-75mm |
14rpm |
42kg |
HYP-300 |
OD 300-630 |
15mm-75mm |
10rpm |
55kg |
HYP-600 |
OD 600-850 |
15mm-75mm |
8rpm |
65kg |
HYP-820 |
OD 820-1050 |
15mm-75mm |
7rpm |
80kg |
HYP-1030 |
OD 1030-1300 |
15mm-75mm |
5rpm |
90kg |
HYP-1270 |
OD 1270-1500 |
15mm-75mm |
4rpm |
100kg | |
|
|
|
Notes: 1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well, please pay attention to check the operation direction and transmission parts.
2 Let the bevel machine clamp the pipe,prevent the collision of tools,the pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.
3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away from the cutting surface,and then remove the pipe.
4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.
5 After finishing the work,need do maintenance work. |
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
Related Products |
|
|
|
|
|