OD-mounted pipe cutting and beveling machine

Main performance of the pipe cutting and beveling machine:

1.Cut range: OD25-1500mm
2.Electric type, pneumatic type and hydraulic type : OCE/OCP/OCH-89,159,168,230,275,305,325,377,426,457,508,610,630,762,830,914,1066,1230
3.Cold cutting and beveling
4.Lower axial and radial clearance
5.Tool feed automatically
can be process different material pipe: carbon steel, stainless steel and alloy steel
6.The split frame design allows it to separate mount the OD of the in-line pipe for strong stable clamping
7.The equipment performs precision in-line cut or cut/bevel simultaneously
The tool bits made of HSS, with cold working have no spark and won't affect the pipe material
8.Electric motor, pneumatic motor and hydraulic motor can be interchange.

Welcome to contact Hei Yan for OD-mounted pipe cutting and beveling machine and other machine you are interested in.Hei Yan also manufacture pipe expanding machine,elbow forming machine,hydraulic press,tee machine,hot induction heating equipment.

OD-mounted pneumatic type:

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.