|
|
| Pipe beveler |
|
| Type:HYP series Pipe Beveling Machine |
| Specification:thickness 1.5-150mm |
| Application:process carbon steel,stainless steel, heat-resistant alloy steel, |
| Delivery:45days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Pipe beveler:
Hei Yan Group manufacture beveling machine.
It is composed of permanent seat, sliding seat, delivery mechanism, centring mechanism, pneumatic clamp mechanism, screw rod transmission mechanism, tool apron mechanism and so on.
Pipe beveling machine Main characteristic:
This machine, pipe bevel belongs to the standard products, we can process the thick and great pipe according to the needs of user.
Pipe bevelling machine Can not only process the U, V welding line of end sloping, back ridging, edge cutting for carbon steel, stainless steel and alloyed steel pipes, but also can treat elbow machine. The processing angle is chosen wantonly, the knife and can leave automatically, small, rigidity is strong, it is simple and convenient to operate.
Beveling scope: OD50-OD426mm
Wall thinckness: 6-100mm
The machine is safe, reliable and widely-used, and it is a ideal pipe end beveling processing equipment.
We can supply various bevel machines according to customers requirement.If you are interested in our products,please feel free to contact us.
We also supply elbow machine,hydraulic press,tee machine,medium frequency power supply,bending machine,pipe expanding machine. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Model |
Beveling range
(mm) |
Thickness
(mm) |
|
HYP-16 |
16-30 |
1.5-15 |
|
HYP-28 |
28-80 |
1.5-15 |
|
HYP-65 |
65-159 |
3-20 |
|
HYP-80 |
80-273 |
4-20 |
|
HYP-80-1 |
80-273 |
15-75 |
|
HYP-150 |
150-351 |
4-20 |
|
HYP-150-1 |
150-351 |
15-75 |
|
HYP-300 |
300-630 |
4-20 |
|
HYP-300-1 |
300-630 |
15-75 | |
|
|
|
|
Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
please pay attention to check the operation direction and transmission parts.
2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
pipe end and the feedings should be left between the 2-3mm gap,to prevent
excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.
3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
which away from the cutting surface,and then remove the pipe.
4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.
5 After finished the work,need do maintenance work |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
