Pipe beveling machine:

This pipe beveling machine series are portable out-mounted pipe cutting and pipe beveling machine with following advantages: light weight, minimal radial space, easy to operate, so it is widely used in the fields of petroleum, chemical, natural gas, power supply construction, boiler and nuclear power.

Pipe beveling machine Can be used for treatment of pipes material: carbon steel, stainless steel and alloys.

Specifications of pipe beveling machine:

There are three cutters for each clamp disk, they serve for different range of
work and can work at same time to insure the effective cutting and fully satisfied
the stable requirements of the guide track. With the hydraulic control system
its cutting speed can be adjusted easily by the size and the thickness of the
caliber.

If you are interested in our pipe beveling machine,pls visit hei yan factory to know more information about pipe beveling machine.hei yan also pressionally supply elbow forming machine,pipe expanding machine,bending machine,hydraulic press,medium frequency,steel pipe,pipefittings and so on.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.