beveling machine:

Bevelling machine Can not only process the U, V welding line of end sloping, back ridging, edge cutting for carbon steel, stainless steel and alloyed steel pipes, but also can treat the welded convex flange and plain flange. The processing angle is chosen wantonly, the knife and can leave automatically, small, rigidity is strong, it is simple and convenient to operate.

The safety regulations of operating beveling machine:
1.Before trial operation you must be test the safety of the power and hydraulic system. According to regulations you should fill the lube in the machine.
2.If many people want to operate the machine,we should appoint one person as a leader to command other people operate the mahine for safety.
3.Machinable workpiece must be clamped and fastened in processing.If the sheet matal is flexible during processing workpieces,we should stop the machine to adjust it.
4.Using a car to load those workpieces should observe the pothook safety operation specification,at the same time,the pothook worker must closely cooperate with crane operator.
5.When the sheet matal is fastened,all auxilians must be leave the travelling car area.
6.Workers must focus on equipment operation situation during processing.The operator don not leave when operating beveling machine.
7.The finished sheet matal should be stacked in order.we should keep the stacking stable.

We can supply various beveling machines according to customers requirement.If you are interested in our products,please feel free to contact us.We also supply elbow machine,hydraulic press,tee machine,medium frequency power supply,bending machine,pipe expanding machine,steel pipe,pipefittings and so on.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work