1 Pump station and moderate frequency power had better install in the workshop vice across-chain inside. 2 Each frequency power supply cooling water should be greater than 50m and have dust control measures.
Coil heating elbow machine Features Description 1. The supporting plate, pushing plate of the machine is formed by 20mm medium plate welding ,the center hole diameter is 350mm. 2. Pushing plate and supporting plate strobe all used hydraulic control . Note: In order to improve efficiency, the pushing plate strobe also was changed to the hydraulic control . 3. The main hydraulic valve parts adopt international standards Rexroth Products (Beijing Hua De), solenoid valves are controlled by DC 24V . 4. Anterior supporting plate is equipped with clip pipe fittings.
Coil heating elbow machine can produce OD25mm-1420mm,wall thickness 5mm-120mm,angle 22.5,45,90,135 degree and customer required angle.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
Maintenance and Repairment of coil heating elbow Machine
1?¡éCheck the fastener of every part to keep it in solid state. 2?¡éCheck if every joint of hydraulic pump station is installed with oil proof rubber seal ring, if any damage with it or oil leak, please change it as soon as possible. 3?¡éIf the forward or backward is not workable, first check if the magnetic valve works, if it operates well, check the sequence valve 6X3?¡éoverflow valve YF-L20H4 or whether one way unload valve 4HD3 is cut by impurities. (It is likely to happen when the machine begins to use). If it is cut, take it down, and wash it by gasonline or diesel, reload it. 4?¡éWithin 1-2 month after using, please wash the oil container and filtrate the hydraulic oil for once 5?¡éWhen wahing the oil container, please wash the fuel inlet filter of every pump station.
