Elbow forming pushing machine:

Elbow forming pushing machine consists of main cylinder,hydraulic pump station,axial plunger pump,motor,hydraulic pushing,stepless speed,induction heating power source.

Elbow forming pushing machine Accessories for the progress
1. Intermediate frequency power source
2. Heating induction coils
3. Mandrels
4. Hydraulic press
5. Beveling machine
The following parts of Elbow forming pushing machine shall be ready by customer:
a. cooling system (tank, water pump, water shed, water pipeline low and above)
b. hydraulic oil : L-HM anti- wear hydraulic oil
c. connection cables
d. heating coils, mandrils according to production scope
e. related machine: press machine, cutting machine for ends of pipe, elbow testing
machine.

We can supply varieties of Elbow forming pushing machine according to customers specific requirements, if you are interested in our Elbow forming pushing machine.Pls visit our factory. Hei Yan also manufacture pipe bending machine,pipe expanding machine,beveling machine,steel pipe,pipefittings and so on.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also