Elbow hot forming machine:

Elbow hot forming machine support the use of a large volume of hydraulic station fuel tank,forward speed can be controlled by adjusting the flow control valve.

•High strength steel metal via gas shielded welding framed machine
•Production seamless45, 90Deg LR&SR elbows size ranging from 1/2"to 36" with thickness up to 80mm, With production standard according to ASME B16.28, ASME B16.9 DIN2605 or Customised is preferable
•Processing materials of carbon steel, alloy steel are available
•Elbows will be formed inhot forming process with the high or medium frequency heating system
•Fast working speed, suitable for batch production for carbon steel and alloy steel elbows.

Main components of Elbow hot forming machine:

  Main pushing machine 
  Hydraulic pump station  
  Main machine control cabinet 
  Medium frequency 
  
Welcome to visit Hei Yan group to know more information about elbow hot forming machine.Our company professionally manufacture bending machine,pipe expanding machine,hydraulic press,medium frequency,beveling machine tee machine and so on.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also