Hot elbow maker:

This series carbon steel elbow hot pushing forming machine is designe and constructed for manufacturing the carbon steel elbows.These elbows are widely used in the connection of the industrial pipelines for the petrochemical,gas and oil pipes,electrical power,food ect.

Specifications of Hydraulic cylinder elbow former:

Production range: OD 21-1420mm
Radius: 1D, 1.5D, 2D
Thickness: 3mm-100mm
Material: carbon steel
Drive type: Hydraulic, Chain

Accessories of the process:

1. Intermediate frequency power source

2. Heating induction coil
3. Mandrels
4. Hydraulic press
5. Bevel machineHei Yan also manufacture pipe expanding machine,pipe bending machine,hydraulic press,tee machine,hot induction heating equipment.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.