Hot elbow fitting forming machine

Hot elbow fitting forming machine is designed and constructed for manufacturing the carbon steel elbows with diameter from 1/2" to 24".
Pipe fittings like elbows are widely used in the connection of the industrial pipelines for the Petrochemical, Gas and Oil pipes, Electrical Power, Food, etc.

Accessories of the process
1. Intermediate frequency power source
2. Heating induction coil
3. Mandrels
4. Hydraulic press
5. Bevel machine
The Hot elbow fitting forming machine is composed by: Hydraulic main pushing machine, hydraulic pump, operate panel, control panel of generators, medium frequency, compensating capacitor, water cable, induction coils adjust frame, reactor.

Advantage: Hydraulic control system, automatic feeding system, counterpart device, fixed mandril, high precision, best pre-sales/after-sales service, do installation etc.

Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.

1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank al