Hot push forming elbow machine
Hei Yan international supply hot push forming elbow machine

The hot push forming elbow machine can process various of elbows with seamless steel

pipe,welded steel pipe and spiral steel pipe.

Technical parameter of hot push forming elbow machine

Diameter range:25mm~1420mm
Thickness range:5mm~120mm
Angle of elbow: 22.5, 45, 90, 135 (can be producted according to users need)

This hot push forming elbow machine power frequency and frequency are adjustable,to ensure proper temperature through heat and material stability.

This hot push forming elbow machine is easy to operate,it can save energy, improve production efficiency,operate automatically.
Hei Yan is specialized in manufacturing tee machine,hydraulic press,pipe bending machine,pipe expanding machine also

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.