Hydraulic hot forming elbow machine

Hei Yan is a professional manufacture of Hydraulic hot forming elbow machine in China,following is the general introduce of our machine.

Specifications of the Hydraulic hot forming elbow machine:

1. Production range: OD 21-1420mm  2. Radius: 1D, 1.5D, 2D 3. Thickness: 3mm-100mm
4. Material: carbon steel  5. Drive type: Hydraulic, Chain

Accessories of the process

1. Intermediate frequency power source  2. Heating induction coil 3. Mandrels
4. Hydraulic press5. Bevel machine

More information of the Hydraulic hot forming elbow machine,welcome to contact us.Hei yan also manufacture pipe bending machine,pipe expanding machine,hydraulic press,tee machine and some assorted accessories medium frequency heating power,moulds.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.