Hydraulic pushing elbow machine

Hydraulic pushing elbow forming machine adopts medium frequency induction heating, this type elbow forming machine is our traditional manufactured products, production history nearly more than 20 years.

Specifications of Hydraulic pushing elbow machine:
1. Production range: OD 21-1420mm
2. Radius: 1D, 1.5D, 2D
3. Thickness: 3mm-100mm
4. Material: carbon steel
5. Drive type: Hydraulic, Chain

Design:
Hydraulic pushing
Hydraulic clamp cylinder
Automatic lifting material
Medium Frequency heating system
All controllings are in one operation case

Advantage of Hei Yan elbow forming machine
Working pushing board, support board,clamp of elbow machine, we all do heat treatment, through annealing treatment to eliminate innerstress, has enough strength and rigidity, prevent perpetual deformation.

Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

Maintenance and Repairment of Elbow Machine 
1 Check the fastener of every part to keep it in solid state.
2 Check if every joint of hydraulic pump station is installed with oil proof rubber seal ring, if any damage with it or oil leak, please change it as soon as possible.
3 If the forward or backward is not workable, first check if the magnetic valve works, if it operates well, check the sequence valve 6X3 overflow valve YF-L20H4 or whether one way unload valve 4HD3 is cut by impurities. (It is likely to happen when the machine begins to use). If it is cut, take it down, and wash it by gasonline or diesel, reload it.
4 Within 1-2 month after using, please wash the oil container and filtrate the hydraulic oil for once
5 When wahing the oil container, please wash the fuel inlet filter of every pump station.