Seamless steel elbow forming machine

1. Raw material that used to this Seamless steel elbow forming machine: seamless steel pipe
 
2. With the professional technician, we can design big size, medium size and small size elbow machine as per customers' requires.
 
3. Pushing machine consists: Host machine, Heating coils frame, Hydraulic system, Electric  equipment system.

The requirement to workshop and auxiliary equipment:
1.Each machine medium frequency cooling water should above 50m3 and has the dust prevention device.
2.Normally require the workroom length 30-40 meters, single machine width 6-8 meters.
Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.