Hei Yan group is specialized in Stainless steel elbow cold forming machine. Stainless steel elbow Cold Forming Machine is fit for producing elbow which curvature is from 1.0D to 1.5D and diameter is from 1/2 to 2 1/2. This innovation will be of great benefit to the users in the respect of quality, efficiency, energy-saving, environmental protection and cost of material. These elbows are widely used in the connection of the industrial pipelines for the Petrochemical, Gas and Oil pipes, Electrical Power etc.
The equipments mechanical actions in forming process are finished by the hydraulic unit under the control of electrical equipments. the technology makes the production efficiency increase two or three times.
Structural features:
1It's constructed with Overall frame structure, strong rigidity, good appearance,stable and reliable functioning. 2 It has individual power construction and electrical system adopts PLC centralized control, the machine is easy to operate.it can divide into manul operation and automatic operation two kinds.the machine is easy to operate.
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches