Welded elbow fitting machine can produce butt welded elbows.
1.The range of the size is OD: 1 inch (25mm)- 60 inches (1420mm); Thickness: 5mm - 120mm; Angle: 22.5 degree 45 degree 90 degree 135 degree and the angle of user needs 2. The Welded elbow fitting machineis composed by: Hydraulic main pushing machine, hydraulic pump, operate panel, control panel of generators, medium frequency, compensating capacitor, water cable, induction coils adjust frame, reactor. Main features of the Welded elbow fitting machine: 1. The Elbow forming machine is constructed with strong metal with good appearance and stable functioning. 2, Hydraulic Elbow Pushing Machine has individual power construction and electrical system, adopts the two kind of heating methods, Intermediate Frequency, the speed of pushing could be randomly adjusted, the speed of adding raw material pipes is fast and the machine is easy to operate. Please feel free to contact us for more details onPipe fitting machine.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1.Check each part of fasteners, ensure they are fixed. 2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also.
