1600T Four columns security door hydraulic press
 
Main Applications and features:
1.Four columns security door hydraulic press is a dedicated security doors hydraulic machine, but also to the suppression of plastic materials, bending, flanging, extrusion and other processes.
2.The machine's working pressure, pressing speed, stroke can be adjusted according to the technical needs within the parameters.
3. This machine has an independent power sector and electrical system, and using the button control to achieve manually, semi-automatic and automatic three operation methods. It can achieve constant pressure and fixed distance two ways suppression
 
Technical data of Four columns security door hydraulic press
Main cylinder pressure: 1600 T
Main cylinder stroke: 480mm
Working table:1450*2400
Generator power:45KW

IF you are interested in our Carbon steel pipe bending machine ,elbow forming machine or pipe expanding machine, don't hesitate to contact us.

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.