500T hydraulic press 500T hydraulic press has an independent power sector, and electrical system, using the button focus control .It can achieve manual, semi-automatic two operation modes. This hydraulic press is easy to operate with low noise, stable pressure, with high pushing and return speed to meet different technical needs etc. Optional accessories: a. Moving table b. Independent cooling system c. Buffer device d. Hole device e. Revolving working table f. Stroke, pressure showing device g. Stripping material device h. Industrial touch screen i. Photo-electric protective device j. PLC
Main Application of 500T hydraulic press: The machine is mainly used for round rough parts, circle parts for heat forging process, and other products' hot forging and hot mould forging. Working pressure of the hydraulic press and stroke can be adjusted within the specified scope.
Hei Yan Group professionally manufacture elbow forming machine,bending machine,pipeexpanding machine,500T hydraulic press etc,we would like show them to you,welcome to visit our factory.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches