Hei Yan can supply various pressure hydraulic press, following is the simple description of the Correction hydraulic press:
Main cylinder pressure:1500T Main cylinder stroke: 450mm Working table:1450*2400 Generator power:37KW
Dynamic system of Correction hydraulic press Hydraulic sysytem is of the most advanced two way valve cartridge,of compact structure.Oil pipe connection is of flange structure,reduce the leakage happening.Hydraulic sysytem has the function of oil filter,ensuring stable work process.All elements adopt high quality items from reputable domestic enterprises.
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
