Hydraulic correcting press machine, Correcting press machine, Elbow correcting machine

You are here: Home - Products - Hydraulic Press - Correct Hydraulic Machine

Hydraulic correcting press machine

Type:HYY
Specification:100-2000t
Application:Mainly used as folding or forming machine if equipped with some suitable
Delivery:30-60days

	Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com

Introduction

Specifications

Tip

Questions

Hydraulic correcting press machine

Main Application and features of the Hydraulic correcting press machine:

1 The machine is mainly used for shaft and sleeve parts to correct,press and repression of small powder products,it can also be used for other similar processes, structures with C-type machines installed in the fuselage .The Hydraulic press has neat and tidy appearance, it has a button or foot pedal two mode operations.

2 Working pressure of the hydraulic press and stroke can be adjusted within the specified scope.

3 The hydraulic press can be equipped with electric hoist, cantilever device.

4 This machine has an independent power sector and electrical systems, it can achieve manually and semi-automatic operate modes.

Structure of Hydraulic correcting press machine:

press mill body, hydraulic ram with movable workable, hydraulic ram with lift

worktable,hydraulic system,induction detacher,movable worktable,guide roller and electric control system

Hei Yan also manufacture elbow forming machine, pipe expanding machine, pipe bending machine, hydraulic press, tee machine, hot induction heating equipment.

Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com

Introduction

Specifications

Tip

Questions

mode	HYY-100	HYY-150	HYY-200	HYY-250	HYY-300	HYY-400	HYY-500	HYY-600	HYY-800
Capacity (T)	100	150	200	250	300	400	500	600	800
Table area (LRXFB) (mm)	800*1000	900*1200	1000*1200	1000*1500	1200*1500	1200*1800	1200*1800	1500*2000	2000*2500
Open height (mm)	650	800	950	950	1100	1100	1100	1250	1500
Stroke(mm)	500	600	700	700	800	800	800	900	1000
Descending speed(mm/sec)	300	300	300	300	300	300	300	300	300
Pressing speed(mm/sec)	9/25	10/30	10/25	7.5/25	7/20	8/20	8/20	8/20	7/16
Ascending speed(mm/sec)	220	235	250	250	250	250	250	250	240
Cushion capacity (mm)	30	60	70	100	100	150	150	200	250
Cushion stroke (mm)	200	250	250	300	300	350	350	400	400

Introduction

Specifications

Tip

Questions

Hydraulic press safe operating attention

1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches

Related Products

-	Hot elbow forming machine

-	Pipe expanding machine

-	Hydraulic pipe bending machine

-	Bevel machine

-	China pipe expanding machine

-	Hot induction heating power

-	Hydraulic presses

-	Tee Machine

-	Pipe fitting machine

-	Portable numerical control cutting machine

Recommend Products

-	China pipe expanding machine
-	Elbow Mandrel Machine
-	Elbow hot forming machine
-	150ton four column hydraulic press
-	Pipe elbow hot induction machine in China
-	pipe induction bender
-	Steel pipe flat end facing chamfering machine
-	Hydraulic homemade tube bender
-	Double end beveling machine
-	Steel pipe beveling machine for end facing

Hot Products

-	Pipe expanding machine
-	Hot induction heating power
-	Gost standard 325mm bending machine
-	Elbow Mandrel Machine
-	Elbow hot forming machine
-	150ton four column hydraulic press
-	Pipe elbow hot induction machine in China
-	pipe induction bender
-	Pipe expansion hydraulic machine
-	Steel pipe flat end facing chamfering machine

Contact Information

Address:	Room No.904, Office Building A of Hua Yuan One World Plaza,Cangzhou,Hebei,China
Phone:	0086-317-3072427
Fax:	0086-317-3047113
Email:	ceo@xnmac.com

GET CONTACT