Hydraulic press machine
Characteristics of Hydraulic press machine1.This hydraulic machine is specialized in the filed of security doors forming, it also apply to plastic materials for repression, bending, flanging and forming.

2.Fuselage frame adopts six column structures which has good directional and good stability. Master oil tank with twin or triplex crock layout, that make the work force is uniform. We can offer the top of the cylinder, hydraulic cushion according to user.

4.Hydraulic press machine has individual power construction and electrical systems, adopts button centralized control, which can be operated by manual, half-automatically and full- automatically. It can be operated both fixed press and fixed tenor.
Hei Yan also manufacture elbow machine,pipe expanding machine,pipe bending machine,tee machine,hot induction heating equipment.

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.