|
|
Hydraulic pressure pipes pressing machine |
|
Type:HYY |
Specification:25-1420mm |
Application:Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening |
Delivery:30-60 days |
|
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Hydraulic pressure pipes pressing machine
Hei yan group is specialized in manufacturing Hydraulic pressure pipes pressing machine according to customers needs.
Hydraulic pressure pipes pressing machine can be widely used to Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening.It is of compact structure and low cost.According to different demands,there are other special structures of hydraulic machines like: two-column, multiway,horizontal type etc.
1 Grades:500 tons,1000 tons,2000 tons,2500 tons,3000 tons.
2 Construction types:column,Frame
3 Material:Carbon steel,Alloy steel,Stainless steel
Accessory for the progress
1 Mould
2 Hydraulic oil More details about Hydraulic pressure pipes pressing machine,Please contact us,hei yan group also professionally manufacture elbow forming machine,bending machine,pipe expanding machine,beveling machine,pipe fittings and so on. |
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches. |
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
Related Products |
|
|
|
|
|