|
|
Single hydraulic sheet drawing press |
|
Type:HYY series |
Specification:20-500T |
Application:Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening |
Delivery:30-60days |
|
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Single hydraulic sheet drawing press Main usage of the Single hydraulic sheet drawing press 1. The machine has frame and four columns two structures, mainly applicable to all types of black and nonferrous metal sheets covering parts deep, shallow drawing process ,it can also be used for bending, milling, stamping and other craft. 2. Working pressure of the hydraulic press and stroke can be adjusted within the specified scope.
Optional accessories of the hydraulic press
1. Moving table 2. Ramming material device 3. Photo-electric protective device 4. PLC 5. Hydraulic system heating, cooling device 6. Heating device 7. Stroke, pressure showing digital control device 8. Industrial touch screen
We can supply varieties of Single hydraulic press, and manufacture according to customers specific requirements. Hei Yan also manufacture elbow forming machine,pipe expanding machine,pipe bending machine and beveling machine. |
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Type |
Normal power(KN) |
Throat depth(mm) |
Slider stroke(mm) |
Max. opening distance(mm) |
Working table(mm) |
HYY41-20T |
200 |
200 |
350 |
500 |
400*400 |
HYY41-63T |
630 |
200 |
400 |
600 |
450*450 |
HYY41-80T |
800 |
2000 |
400 |
650 |
500*500 |
HYY41-80T |
1000 |
250 |
400 |
650 |
550*500 |
HYY41-150T |
1500 |
250 |
450 |
700 |
550*500 |
HYY41-200T |
2000 |
300 |
500 |
700 |
600*600 |
HYY41-250T |
2500 |
320 |
500 |
700 |
650*600 | |
|
|
|
Hydraulic press safe operating attention 1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches. |
|
|
|
|
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
Related Products |
|
|
|
|
|