Tee hydraulic press machine has individual power construction and electrical systems, adopts PLC button centralized control, which can be operated by jog, manual, semi-automatically and full-automatically. Pressure relief adopts advanced production techniques.
Without the worker's relief, can reduce the rate of consumer goods, increase security, reliability and product quality. Our company had come up to the production capacity of 100T-4000T. Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, Tee hydraulic press machine and the assorted beveling machine, mould to you.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
