Application of hydraulic tee machine Mainly use for process straight or reducing tee, diameter range from 34mm to 426 mm, also applied to batch process.
Product describe of hydraulic tee machine 1 process materials: stainless steel or carbon steel 2 adopts extrusion and expansion process 3 using both manual and automatic mode 4 electric control system adopts PLC and touch-screen display
Requirements of hydraulic tee machine Environment temperature: 0-40degree Dynamic power supply: three-phase four-wire 50HZ,380V Range of voltage fluctuation: 380V +/-10% Hydraulic oil: Number 46 anti-wear hydraulic oil Please feel free to contact us for more details on tee machine.we also supply pipe bending machine,pipe expanding machine,hydraulic press,welcome to your visit for the machinery.
1. Before starting,check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.
