Product description of Tee Extude Forming Machine 1 Has good performance and accuracy-oriented preservation. 2 Tee extude froming machine uses two cartridge valve integrated control system,reliable Action, long service life,small hydraulic impact,reduces link pipe and leakage 3 Electric uses PLC programmed controll to manual,semi-automatic.full automatic mode 4 It does not need to manually handle the pressure relief, reduce the manual operation, reject rate,increase the security and reliablity
This machine is mainly for a variety of tee extrusion cylinder side,changing the location of manufacturing tees fo 90 degree,135 degree
If you need some related information about Tee Extude Forming Machine ,please contact us.We are also manufacturing the elbow machine, pipe expanding machine, pipe bending machine , hydraulic press according to customer's requirement.
1. Before starting,check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches
