Induction pipe bending

Raw materials of the Carbon steel pipe bending machine are as follows: seamless steel pipe, welded steel pipe, or rolled steel pipe.

Specifications for induction pipe bending

a. Production range: OD21mm-1420mm
b. Radius: 2.5D-10D
c. Thickness: 10mm-80mm
d. Material: Carbon steel, Alloy steel, Stainless steel
e. Drive type: Hydraulic, chain
The induction pipe bending machine heats the pipe inductively over a small cross-section, while the pipe is mechanically driven through a watercooled induction ring. The bending of the pipe is caused by means of a rotating arm on a pivot that, at the same time, determines the radius of the bend.

Hei Yan Group is specilized in manufacturing large diameter induction pipe bending machine,with effectively cost induction heater,also induction heater based elbow machine,hot pipe expansion.Pipe bevelling machine,straightening machine.

Middle frequency induction bending is a hot bend process of pipes and shaped steel etc. using middle frequency induction heating.
It is widely utilized for pipeline, chemical plant, power plant, shipbuilding, and structures.
Small radius bend is used in industrial plant piping in place of elbow.
Also it's used in the piping work as the most economic way of Weldless Piping System
Shaped steel bend is widely used for structure and civil construction.

Because of the quality, accuracy and demonstrated savings achieved through induction bending, it is a preferred alternative to traditional fit-and-weld procedures.The induction pipe bending process uses induction heating to produce highly accurate bends. The quality of induction bends is superior to the elbow fitting.