Radius Bender

HYG series Radius Benders is specially designed for production bending radius above R = 3 times benders.
The Radius Benders we supplied can process the following pipe:

Min bending radius R=2.5D
Max. bending radius R=6D
Max. process diameter: OD 325mm
Min. process diameter: OD 89mm
Min. process thickness: 6mm
Max. process thickness: 18mm
   
The whole Radius Bender is composed of host machine and medium frequency heating power.
Host machine used hydraulic transmission, it's easy to achieve fast conversion between fast pushing-fast return and feeding speed, and randomly to adjust the pushing force. Stable working with low noise, no pollution. We can also adjust the process specification of the products. It's convenient and reliable, low failure rate.

Welcome to visit us for more information of elbow forming machine, pipe expanding machine, beveling machine and the forming mould.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if

the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate

normal, if working normally, then you should check whether the electro-hydraulic relief valve or the

one-way unloading valve has contaminant that made it could not working or not(this phenomenon

usually happen when you just use this machine). If has contaminant, you should open it, clean by

gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.