Pipe beveling machine

Processing diameter of the pipe beveling machine OD50-OD426mm,wall thickness 6-100mm seamless steel pipe.

The pipe beveling machine is fitted with rolling bracket, so the pipe can be adjusted from upper to lower to keep accordance between the center of various steel pipe and the center of beveling machine. The lifting of roller can be operated manually.

The machine is safe, reliable, convenient and widely-used, and it is a ideal pipe end beveling processing equipment.

 Hei Yan also made the pipe beveling machine according to the requirement of users.

 We supply tee machine,elbow machine,hydraulic press also.
 

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.