Bevel Machine

  Features of bevel machine

   1 On-line installations cutting and beveling pipe simutaneously

   2 Minimal radial and axial are applicable in low profile

   3 Pneumatic motor supplier power and turning work without fire,insure its abroad performance

   4 Split-frame pipe lathes and auto bit feed system insure the convenient operation

   5 Power pneumatic motors are easy to handle and install

  6 Can process U type,V type, double V type

Wide Application

  The bevel machine can process carbon steel,stainless steel, heat-resistant alloy steel,wall thickness has reached 150mm.

We can supply various bevel machines according to customer's requirement.

We supply elbow machine,hydraulic press,water pressure tester also.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.