High speed pipe end beveling machine
 Application
  The high speed pipe end beveling machine is applicable to the pipe end beveling with various materials such as carbon steel,alloy steel,stainless steel.

 Product feature of high speed pipe end beveling machine

  1 It can automatically complete self-centering and chunk clamping pipe
  2 With minimum vibration and high quality beveling surface
  3 Beveling speed is high, for example,stainless steel pipe(OD:610mm,thickness:25mm),it takes 2 minutes to bevel 37.5 degree
  4 It can be cooperate into a automatic beveling production line with pipe OD 2"-16" and 2"-24"

We also offer elbow machine,tee machine,pipe bending machine,pipe expanding machine.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.