Semi-automatic operation beveling machine

Hei Yan supply bevelling machine used to bevel elbow ,pipe etc.

Beveling machine for elbow pipe bender is widely used for butt weled elbow,tee,bender and pipe beveling.
Beveling machine for elbow pipe bender is make up of

Beveling machine for elbow pipe bender is a multifunction machine,It can support beveling work for elbow,tee,pipe,bender in the same machine,you need to change working table only for different products,for example:

Pipe Beveling: except the main working table,we need two brackets to support pipe also.
Elbow Beveling: we need a big working table to make elbow lay on it.
Bending beveling: Except the main working table,we need one extra bracket to support another bender end.

Adaptive working scope of Pipe fittings: OD60--1420mm

Beveling machine for elbow pipe bender is a convenient,economic machine.With easy operating,High working efficiency characters,
It is widely adopted by users home and abroad.

Notes:
1 The bevelling machine should be placed at flat,stable fixation,to avoid moving when using.when the power supply connect well, please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,preventing the collision of tools,the pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feeding, should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finishing the work,please do maintenance work.