1. The machine for producing 6-12" ASTM B16.9 stainless steel elbow with Radius of 1.5D 2. Main Technica data of Cold pressing core pushing elbow machine: 2.1 Nominal : Main cylinder Clamp force:5000KN,two cylinders Main cylinder stroke: 900mm Side cylinder pushing force:2500KN 3. Operation :1.click for a activity 2.Manual for series of activity 3.Automatic for a whole producing activity 4. Hydraulic system of Cold pressing core pushing elbow machine: Main hydraulic system is installed above of machine,It is combined by pump,generator,valve integrate parts,oil case etc.Drive organ includes filter of oil,force of cooling oil teperature and oil rank meters.Main oil pump is constant power to pump,flux can be changed by pressure.
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.
