|
|
| Elbow cold forming machine |
|
| Type:HYW-2 series cold forming |
| Specification:21.3-114mm |
| Application:steel industry ,shipbuilding |
| Delivery:30-60days |
 |
TQ:
|
|
|
|
|
|
Elbow cold forming machine
Hei Yan Int'L Development Limited is a manufacture of Elbow cold forming machine and we have been in this line for many years.
The cold elbow forming machine we supplied could manufacture the elbows ranging 1/2'-4'of thickness from 1mm to 8mm with stainless steel ,carbon steel, alloy steel,monel,nickel alloy etc.
Main features of Elbow cold forming machine:
1. It's constructed with strong metal frame with good appearance and stable functioning.
2. It has individual power construction and electrical system,adopts PLC button center
control which can be conveniently adjusted and operated both manually automatically.
3. The demoulding and depoling devices are good features of our forming machine which make the mould change easy.
Welcome to contact us for more information of the Elbow cold forming machine and the machine that you are interested in. |
| |
Your Demand,Our Liability TEL:0086-15716898927 E-mail:sales@xnmac.com MSN： sales@xnmac.com |
|
|
|
|
Cold elbow forming machine processing scope and mould equipment |
|
Type |
Processing scope(inch) |
Mould |
Forming speed |
|
63T |
1/2-2 |
OD32,38,45,57 OD34,42,48,60 |
15-20s/pc |
|
100T |
21/2-5 |
OD76,89,102,108,114 |
20-30s/pc |
|
400T |
5-8 |
OD133,140,159,168,219 |
40-50s/pc |
|
630T |
6-12 |
OD159,168,219,273,325 |
120-160s/pc |
|
800T |
10-16 |
OD273,325,377,426 |
250-300s/pc |
|
1000T |
12-20 |
OD325,377,426,503 |
350-450s/pc | |
|
|
|
Maintenance of machine:
The equipment should be serviced about once a month, maintenance as following:
1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also.
|
|
 |
Related Products |
|
|
|
|
|
