Elbow hot forming machine

Elbow hot forming machine is designed and constructed for manufacturing the 45 degree, 90 degree, 180 degree elbows with bending radius of 1.0D, 1.5 and with diameter from 1/2" to 24" of carbon steel and alloy steel elbows,
The specification (dimension, radius, thickness) of the finished elbows can meet the stipulated international standard, such as ANSI B16.9, ANSI B16.28, DIN2605, GB12459, etc

The Elbow hot forming machine are suitable for the batch production. These produced elbows are widely used in the connection of the industrial pipelines for the Petrochemical, Gas and Oil pipes, Electrical Power, etc.
Hei Yan also manufacture pipe expanding machine,pipe bending machine,hydraulic press,tee machine,hot induction heating equipment.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.