Stainless elbow forming machine

Hei Yan Int'L Development Limited is a manufacture of elbow machine and we have been in this line for many years.

The Stainless elbow forming machine we supplied could manufacture the elbows ranging 1/2"-4"of thickness from 1mm to 8mm with stainless steel.

Main features of Stainless elbow forming machine:

It's constructed with strong metal frame with good appearance and stable functioning.
It has individual power construction and electrical system,adopts PLC button center control which can be conveniently adjusted and operated both manually automatically.
The demoulding and depoling devices are good features of our forming machine which make the mould change easy.
Welcome to visit Hei Yan, we would like to show ourelbow forming machine,pipe expanding machine,Pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.

Cold elbow forming machine safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.