Stainless steel elbow making

This series stainless steel elbow machine mainly do the stainless steel, carbon steel elbow forming. There are two ways of pushing : steel ball passes ball pushing and core rod forming pushing. Core rod forming pushing is equipped with semi-automatic demould equipment.
The stainless steel elbow machine consists: Main body(frame), Closing cylinder, Side pushing cylinder, Demoulding  equipment . Control equipment is made up of power station, stop block, pipe line and equipment control box, operation box etc.

Constructed in compact form, it works effectively to help customers expand the market share. Welcome to contact us for more stainless steel elbow machine information and carbon steel elbow machine, pipe bending machine, pipe expanding machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.