Correction press

From type of structure, hydraulic press machine could be classified to single column, four columns, and framed hydraulic press machine. This 3 types take up more than 95% market shares of hydraulic machine.The hydraulic press can be used as

Feat and Characteristics
This serial liquid press has two kinds of electric apparatus control system whth PLC,have three operation mods:adjust,manual and semiautomatic.Correction press,with pressure hold and time delay functions.While pressing shaping definitely,while protecting and mangling after suppressing and automatic backward stroke movements.Adjustable stroke and pressure in the specifed scope.

Hei Yan Group,innovate Correction press for widely use in industry.

Instruction of correction press

1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.