Hydraulic deep-drawing press Hei Yan professionally manufactures Hydraulic deep-drawing press for many years. We afford the mending metal for the cars and motorcycles, in addition, the electric products, kitchen wares and bath products in our living, which becomes the first step of the pressing. Features of Hydraulic deep-drawing press: Specially designed for deep-drawing and punching, these machines can handle tough processing that can't be done mechanically. The high-precision design makes them safe and dependable. Push-bottom controls and Logical oil circuit design and make our presses simple to operate and easy to maintain. Longer stroke and die cushion device give you the power you need for the most complicated jobs. The forced lubrication system keeps sliding surfaces in e*cellent condition and parts moving smoothly and freely. The Hydraulic deep-drawing press can be matched with an automated operation system to load and unload materials, to move out bolster, to quick die change and clamp device automatically.
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures 2. Before formal operating subject to idle test, be sure each part can normal work. 3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold. 4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area. 5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking. 6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches.
